YWZ9 power hydraulic block brake

　　Product introduction:

　　The electric hydraulic block brake is widely used in deceleration or parking braking of mechanical drive devices such as lifting, metallurgy, mining, port, wharf, construction machinery, etc.

　　Conform to the standard:

　　The installation dimension of YWZ9 series electric hydraulic block brake is up to GB6333-86 standard, and the technical requirement is in line with JB6406-2006 standard.

　　Main characteristics of hydraulic brake:

　　The main swing hinge points are equipped with self lubricating bearings, which have high transmission efficiency and need not be lubricated in use.

　　The main performance is safe and reliable, stable braking and high action frequency.

　　In the process of use, it keeps the equal distance between the two sides of the tile in the process of use, so as to avoid the phenomenon of the brake liner floating on one side of the brake liner because of the uneven distance.

　　The brake spring is arranged in the spring tube, and a braking moment ruler is arranged on one side, which is convenient and intuitive to adjust.

　　The asbestos free brake pad and brake shoe are of card insertion type, safe and reliable, convenient and quick to replace.

　　Conditions for use of hydraulic brakes:

　　The ambient temperature is -20 C ~ +50;

　　Power: 380V, 50HZ;

　　Relative humidity: no more than 90%;

　　Flammable, explosive and corrosive gases should not be allowed in the surrounding working environment.

　　The altitude of the use site is in accordance with GB755-2000;

　　Anticorrosive products should be used for outdoor rain or snow erosion or corrosive gases and media.